Removing the door panel

     These are instructions on how to remove the door panels of your 90-91 Civic and CRX. It'll be similar if not the same for 88 and 89s to.
     First take off window crank. If you don't have the tool, pull the arm away from the door just a little bit and look for a little metal clip. Stick a screwdriver in and pull it out towards the knob on the crank. Next, unscrew the phillips screw in the cubby on the arm rest, in the door handle, on back and top front of door, holding the grilles on, behind grille, and if you have a 90-91 unscrew the bar on the bottom enclosing the seatbelt. Then pull out on the door releasing all the clips. Once it is free from the door up to the top, push up on the door panel. All thats left are the 2 screw on the back where the seatbelt is held on the door panel up top. Take these out, slide the seatbelt threw the gap, and your done.

-4thgencivic