Disassembling Front End

Disassembling front end of the your 88-91 Civic and CRX

     These are instructions on how to remove the headlights, filler, and front bumper of your EF Civic and CRX. CRX's don't have a filler piece.
Front Bumper
     Take the bumper lights out by removing the 2 phillips screws out on each light. Pull the lights out and take the bulbs out of the back. Then take the screws out of the bumper that are in the wheel well. These are flat, black, phillips screws. There are 2 on each side. Next look through the wholes in the front bumper that the bumper lights where in and you'll see 2 12 mm bolts on each side, Take these out and the bumpers off.
Filler Panel
     There are 7 10mm bolts to take this off. 2 on each side connecting it to the fenders, one in the center, and one under each headlight.
Lights
     There is only one screw on each corner light if you have a 90-91. There's 2 on the outside of the corner lights if it's an 88-89. I'm not sure if that's it. The screw on the 90-91s is right inside the tip of the fender. Take that out and slide the corner light off and take the bulbs out. Unclip the plugs on the back of the headlights that are for the hi/lo beams. Then there are 2 10 mm bolts on the top of each headlight and one on the bottom if you look straight in. Unscrew the bolts and pull the headlight out.

-4thgencivic